How to Remove and Replace Your Kitchen Faucet

Read more about kitchen tap with pull out hose here. Be smart about the choice so that you find the best fit for your home and know what to look for before you buy. Clean the copper tubing with fine sandpaper, then slip the nut, compression ring and valve body over the pipe and tighten. Close the valve, turn on the main water valve and check for leaks. Place a bucket under the faucet and turn the faucet on to check for leaks. Most likely, the main obstacles will be the pipes and P-traps that drain the sinks.

kitchen faucet intitle:how

One great feature of this faucet is it has the stainless LifeShine finish which is guaranteed not to tarnish, corrode or flake. The tips you will learn here can be applied to most matching hole configurations. Once you have unscrewed the nuts that connect the supply lines to the valves, remove the nut that connects the diverter to the sprayer hose with a basin wrench. After all the lines under the sink have been disconnected, the old faucet can be removed.

Steps to Finding the Ideal Kitchen Faucet

While pull-down sprayers are by far the most common faucets seen in modern kitchens, you can choose another style based on your preference. Side sprayers used to be popular back in the day, but they tend to leak more often than other variants. Once you have cleaned the holes, it’s time to drill extra holes if necessary to accommodate a three-hole faucet. Just make sure that the extra holes are aligned properly with the center hole. If the space seems too dark, do use a lamp to see the fittings before using an adjustable wrench to remove the nut. In most cases, this nut tends to be too tight, so use a bit of special lubricating or penetrating oil like liquid wrench before unscrewing the nut. If the faucet is extremely old, you might need to wait overnight for the nut to loosen for easy removal.

How to install your new faucet?

Follow the brushing by spraying penetration oil, such as Liquid Wrench, on the nuts to help dissolve the corrosion. Unfortunately, it’s not always as simple as it sounds, swapping out an old chrome faucet for one with a trendy matte black finish. If you are looking to replace your kitchen faucet, chances are that you are doing so because it is leaking or it has some other kind of problem.


Tighten the sprayer, then remove the clip from your faucet hose. Grab the new faucet and carefully thread the hoses down through the escutcheon and center sink hole. Also, disconnect the faucet outlet hose from the faucet-mounting bolt (blue arrow in the photo). Since your water is now turned off, you have no need for the hoses up to your faucet.

Leave a Reply

Your email address will not be published. Required fields are marked *